Mr.D.Rajeev is a Reviewer for Engineering Science and Technology an International Journal (Elsevier).
Participated International conference on modeling,optimization at Noorul Islam University
Participated International conference on Recent advances in mechanical Engineering at Ponjesly college of Engineering
Participated Application of CFD In Thermal Engineering
Published a Paper "PREDICTION OF TOOL WEAR IN HARD TURNING OF AISI4140 STEEL THROUGH ARTIFICIAL NEURAL NETWORK, FUZZY LOGIC AND REGRESSION MODELS" On International Journal of Engineering TRANSACTIONS A: Basics Vol. 31, No. 1 (January 2018) 160-165, Scopus Index of SNIP 0.569
Published a paper "Artificial neural network ANN based tool wear estimation on dry hard turning process of AISI4140 steel Using coated carbide Tool" on Bulletin Polish Academy 2017, SCI & Scopus Indexed journal of Impact factor 1. 156
Published a paper "Statistical Analysis of Surface Roughness in Hard Turning: An Optimization Approach" on Applied Mathematics and Information Sciences 2017 of SNIP 0.639
Published a paper "Prediction Of Flank Wear By Fuzzy Based Model Using Vibration Signals In Turning", International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 9 No.26 (2014) pp. 9327-9331
Published "A review on Signal acquisition methods for Tool Wear Monitoring in turning process", Advanced Materials Research Vols. 984-985 (2014) pp 83-93
Membership in Professional Society :ISTE
Has been a resource person for Mechanical Technical Symposium Thamirabharani Engineering College, Tirunelveli.
Has been a resource person for FDP at Christian College of Engineering and Technology, Dindugal.
Participated Application of CFD In Thermal Engineering at Mar Ephraem
Presented a paper"Analysis and testing of crater wear" in a National level conference on Emerging trends in mechanical engineering at PET college of Engineering
Participated Short term course on CATIA V5 & Uni Graphics MSM Systems Bangalore
Membership in Professional Society :ISTE,SAE
Application of CFD In Thermal Engineering at Mar Ephraem
L. Robin K. J. Laws W. Xu G. Kurniawan K. Privat M. Ferry "The Three-Dimensional Structure of Mg-Rich Plates in As Cast Mg-Based Bulk Metallic Glass Composites",Metallurgical and Materials Transactions A 07/2010; 41(7):1691-1698. DOI:10.1007/s11661-009-9989-8 1.73 Impact Factor.
Wanqiang Xu Lalu Robin Rongkuen Zheng Kevin J. Laws Michael Ferry Scripta Materialia "Phase redistribution in an in situ Mg-based bulk metallic glass composite during deformation in the supercooled liquid region" 09/2010; 63(5):556-559. DOI:10.1016/j.scrip"amat.2010.05.029 2.97 Impact Factor.
Wan Qiang Xu Lalu Robin Kevin J. Laws Rong Kun Zheng Michael Ferry Materials Science Forum "The Redistribution and Alignment of Crystalline Flakes in a Bulk Metallic Glass Composite during Thermoplastic Forming" 12/2011; 702-703:971-974. DOI:10.4028/www.scientific.net/MSF.702-703.971
Michael Ferry Wan Qiang Xu Md Zakaria Quadir Nasima Afrin Zinnia Kevin J. Laws Nora Mateescu Lalu Robin Lori Bassman Julie M. Cairney John F. Humphreys Adeline Albou Julian H. Driver Materials Science Forum "3D-EBSD Studies of Deformation, Recrystallization and Phase Transformations" 04/2012; 715-716:41-50. DOI:10.4028/www.scientific.net/MSF.715-716.41
Wanqiang Xu Lalu Robin Rongkun Zheng Kevin J. Laws Michael Ferry Scripta Materialia Corrigendum to: "Phase redistribution in an in situ Mg-based bulk metallic glass composite during deformation in the supercooled liquid region" [Scripta Materialia 63 (2010) 556-559] 10/2010; 63(8):903-903. DOI:10.1016/j.scriptamat.2010.06.043 2.97 Impact Factor
Mr. Lalu G Robin had published a paper "EFFECT OF SS 316 WIRE MESH AND SiCP CERAMIC PARTICLES ON EXPLOSIVE CLADDING OF DISSIMILAR ALUMINIUM Al 5052 AND Al 1100 PLATES SUBJECTED TO VARIED LOADING RATIOS" on Journal of Manufacturing Engineering, December, 2017.
Published a paper "Wire mesh/Ceramic particle reinforced Aluminium based Composite using Explosive Cladding" on Materials Science Forum of 2017 SNIP 0.306
He is a Reviewer for Journal of Manufacturing Engineering.
He is a Reviewer for Journal of Material Engineering and performance.
Presented a paper "Wire mesh/Ceramic particle reinforced Aluminium based Composite using Explosive Cladding" in Beijing Technical University, China
Mr.Leo Bright Singh has been a resource person for FDPs in Annai Vellankani College, Nesamony Christian College.
Participated two days national level workshop on Computational Fuid Dynamics at St. Xaviers Catholic College of Engineering and technology
Presented a paper on National Conference on "Reliability Analysis of Gearbox in Horizontal Axis Wind Turbine" at Bannari Amman Institute of Technology
ICTMI-16 conference at Rajiv Gandhi Centre for Bio Technology & Mar Ephraem
Resource Person on Leadership and Personality development Handled more than 100 seminars National & International Level
Paper presentation on National Level symposium "AutoMonteur 2K15" at PonJesly College of Engineering, Nagercoil.
Application of CFD In Thermal Engineering Participation Mar Ephraem
National Conference on " Effect of nano particles on the mechanical properties of Al/SiC composites" Paper Presentation Anna University, Chennai
National Conference on " Effect of nano particles on the mechanical properties of Aluminum based composites" Paper Presentation National Engineering College, Kovilpatti
National Conference on " Synthesis of Metal Matrix Nano Composites" Paper Presentation Easwary Engineering College, Chennai.
Workshop on " Advances in Lean Manufacturing and Application" Participation MIT Campus, Anna University, Chennai
FDP on " Operational Research " Participation MIT Campus, Anna University, Chennai
Training on " Internal Audit " Participation Easwary Engineering College, Ramapuram , Chennai.
Workshop on " Contemporary Approaches in Hydrogen Fuel " Participation Sri Muthukumaran Institute of Technology
Staff vice-chairman :IET
National Conference: on Welding of Steels Participation at Annamalai University
National level conference Participation at Satyam college of engineering and technology.
Mr. Vijaya Kumar S had presented a paper "MECHANICAL PROPERTY EVALUVATION OF HYBRID REINORCED EPOXY COMPOSITE" at Sai Ram Institute of Technology, Chennai.
Participated in International Conference on Advanced Manufacturing Process Anna university chennai,Department of Production ,MIT Campus
Participated in International Conference on Advanced Manufacturing Process Anna university Chennai
Participated in International Conference on Advanced Materials Technology Participated in
Co-Ordinator and Organized a National Level Symposium MATRIX'12 at Department of Mechanical Engineering Sun College of Engineering & Technology
Participated in National level Seminar on 'Engine Management System' St Xavier college of Engineering
Participated in National Workshop on Testing and Characterization of Engineering Material Council of Scientific and Industrial Research (CSIR), Trivandrum, Kerala
Participated in Application of CFD In Thermal Engineering Mar Ephraem
Participated in Faculty Development Program on Processing and Characterization of Composite Material including Natural Fiber Reinforced Composites AICT , organized by the Sri Sai Ram Institute of Technology
S.Vijayakumar, S. Muthuraman, P.M. Diaz IETECH "Experimental Analysis of Measuring Techniques for Particulate PAH Emission from Diesel engine". Journal of Mechanical Design vol 3 no2 067-070.
S.Vijayakumar, K.Palanikumar "Mechanical property evaluation of Bi directional Siisal fiber epoxy composite" IETECH Journal of Mechanical Design vol1no2 057-061
National Conference on Renewable Energy Paper Presentation at PSG Institute of Technology
National Conference on "Refrigeration using waste Heat by an Engine" Paper Presentation PSG Institute of Technology
National Conference Participation Bannari Amman Institute of Technology
National level conference on Emerging trends in Mechanical engineering Participation Satyam college of engineering and technology
Two days Workshop on Computational Fluid Dynamics(CFD) Participation St Xavier's Catholic College Of Engineering.
International Conference on renewable energy Participation Tamizhan College of Engineering
National level Conference Participation Satyam college of engineering and technology.
Workshop on Application of FEA Participation JP College of Engineering
Mr.C.Gigin Durai has awarded DHRONACHARYA Award of Excellence for Mentoring Motorage-2017 Team.
International conference on Recent advances in mechanical Engineering Participation Ponjesly college of Engineering